Tunap

Tunap 926 Carbon Cleaner

The unique XGel technology dissolves carbon contamination extremely quickly. The outstanding surface adhesion and coating properties ensure a very short penetration time and excellent dirt removal. Ideal for cleaning components contaminated with carbon deposits in the intake and exhaust gas system.

XGel Technology

  • Optimum surface coating
  • Ideal penetration time
  • Outstanding run-off properties
  • With visualiser for checking surface coating

Properties  

  • Excellent cleaning effect for residues containing carbon
  • No solvents
  • Non-combustible

Application area  

Ideal for cleaning smaller components in the intake and exhaust gas system such as EGR valves



Tunap 138 Intake System Cleaner



Properties

  • Raises resinous and oily dirt in the intake
  • Solves carbon deposits
  • Reduces fuel consumption by clean components

Use

  • Cleans carburettor interior and exterior
  • Rinses holes and jets
  • Cleansintake/throttlebodyarea components
  • To free all moving parts, especially exhaust gas recirculation valves
  • To remove heavily coked components such as glow plugs and injectors


Tunap 957 Interior Engine Cleaner

Innovatively formulated, solvent-free engine interior cleaner manufactured on the basis of low viscosity detergents. The cleaner reliably ensures full dispersion and removal of dirt deposits in the engine oil system. Contains an additive for lubrication of components during cleaning.


Properties:

  • VOC (solvent)-free formulation
  • Contains low viscosity detergents for excellent cleaning results
  • Reliably removes oil sludge deposits (black sludge) from the engine oil system
  • Protects against engine damage from blocked up oil channels and holes
  • Contains an additive for lubrication of components during cleaning
  • A chlorine, phosphate, nitrate and heavy-metal-free formulation
  • Removal possible over the old oil
Area of use:
  • If black sludge is suspected
  • With piston ring compression loss
  • For hydraulic valve rattle


Tunap 989 Injector Direct Cleaner

This product removes from injectors any fuel-related sediment such as deposits of carbon or res- in. Ideal for extensive contamination (e.g., driving >25,000 miles or 4 years without cleaning injectors) Thanks to reactive organic amines, ROA2 cleaning technology directly cleans injectors, elim- inating the need for expensive replacement injectors in the future.


ROA2 technology  

  • Better-than-ever cleaning formula based on ROA2 technology
  • Deposits on injectors are released and cleaned away.
  • Re-contamination is prevented.
  • Excellent dissolution capabilities in all gasoline fuel mixtures.
  • ROA2 Level 2: ideal for extensive contamination (e.g., driving >40,000 km or 4 years without cleaning injectors)

Characteristics  

  • Reduces fuel consumption and emissions caused by fuel-related deposits to the original factory condition.
  • Improves fuel combustion for reduced particulate emissions (EU’s Euro 6 standard on vehicle emissions)
  • Fuel is activated and is effective in the intake manifold and combustion chamber
  • Suitable for all (bio-) diesel mixtures

Uses

  • For all common rail and pump-nozzle systems.
  • Protects against poor fuel quality.

Application  

Put direct cleaner for gasoline injectors into vehicle’s fuel tank; use a filler neck to do so


Tunap 184 Regeneration assist 

System Ingredient for all diesel engines with serial and aftermarket installed Diesel Particle Filter. Reduce burn off temperature of the soot in the Diesel Particle Filter caused to adverse drive profile.

Properties

  • Reduce burn off temperature of the soot inside Diesel Particle Filter
  • Enables the automatic combustion of the soot at lower exhaust temperatures due to unsuitable driving conditions
  • Suitable for all diesel engines as serial or aftermarket installed diesel particle filter
Use
  • Preventative after particle filter cleaning with MP 131
  • For preventive use in vehicles with diesel particulate filter that are operated with unsuitable drive conditions (e.g. mainly short distance driving, Stop and Go driving).

Application
  • Add product with every 3rd tank stop. Lowest fuel level 10 litres.

Special advice

  • Do not overdose!
  • Unsuitable with vehicles with integrated additive system (e.g. FAP- System)


Tunap 984 Injector Direct Protection

When used regularly, protects injectors from fuel-induced deposits and lowers fuel consumption and emissions to original factory levels. ROA 2 cleaning technology works directly on the injectors, reducing the risk of costly replacement.

ROA-Technology
(Reactive Organic Amines Technology)

  • Higher performance cleaning formula based on ROA2 technology.
  • Deposits on injectors are released and cleaned away.
  • Re-contamination is prevented.
  • Excellent dissolution capabilities in all (bio- )diesel mixtures.
  • ROA2 Level 1: The cleaning performance is strong enough to remove dirt that builds up over the course of up to 10,000 miles (or the time between inspections).

Further characteristics

  • Protects against fuel-induced deposits. Reduces fuel consumption and emissions caused by  fuel-related deposits to the original factory condition.
  • Improves combustibility by pushing cetane number into the safe range.
  • Reduces fuel-induced knocking.
  • Gives the fuel age stability, protecting against accumulation of sludge.
  • Suitable for consumer use.

Use

  • For all common rail and pump-nozzle systems.
  • Protects against poor fuel quality.
  • For regular protection after the use of Injector Direct Cleaner MF 989 or Injector Intensive Cleaner MF 938.

Application:

Add to fuel tank during yearly inspection. Use the included filling nozzle.


Tunap 974 Injector Direct Protection - Petrol

When used regularly, protects injectors from fuel-induced deposits and lowers fuel consumption and emissions to original factory levels. ROA 2  cleaning technology works directly on the injectors, reducing the risk of costly replacement.

ROA-Technology
(Reactive Organic Amines Technology)

  • Higher performance cleaning formula based on ROA2 technology.
  • Deposits on injectors are released and cleaned away.
  • Re-contamination is prevented.
  • Excellent dissolution capabilities in all gasoline fuel mixtures.
  • ROA2 Level 1: The cleaning performance is strong enough to remove dirt that builds up over the course of up to 10,000 miles (or the time between inspections).

Further characteristics

  • Protects against fuel-induced deposits.
  • The fuel becomes activated and acts directly on the injector.
  • Lowers fuel consumption and emissions caused by fuel-induced contamination back to original factory levels.
  • Suitable for consumer use.

Use

For all suction-pipe and direct-injection gasoline engines.
Protects against poor fuel quality.
For regular protection after the use of Injector Direct Cleaner MF 979 or Injector Intensive Cleaner MF 937.


Application

Add to fuel tank during yearly inspection. Use the included filling nozzle.


DPF Cleaner Tunap 931 + 932

Non-flammable, metal-free special cleaner for cleaning of soot and ash deposits in the particulate filter. Evaporates without leaving residue. Thanks to unique wetting properties the cleaner is able to remove and clean soot and ash deposits from porous honeycomb structures as are present in the particulate filter.

Properties

  • Clean without dismantling the particulate filter
  • Minimises ash and soot in the diesel particulate filter
  • Neutral, ash and metal-free formulation
  • Diesel particulate filter cleaner: Removes carbon deposits in particulate filters B Non-flammable and metal-free
  • Rinsing solution: Dissolves ash deposits in particulate filters
  • Evaporates without leaving residue